A-A-54471
12 August 1991
COMMERCIAL ITEM DESCRIPTION
SPLINT, WIRE (Malleable Aluminum)
The General Services Administration has authorized the use of this Commercial Item Description.
This Commercial Item Description covers a wire splint for use in first aid kits.
Salient Characteristics:
The splint shall meet the requirements set forth in paragraph 5.12.2 (Aluminum Splint) of ANSI Standard Z308.1-1978 for Industrial Unit-Type First Aid Kits. Each splint shall be constructed of expanded aluminum metal and in finished form shall measure 3-3/4" ± 1/8" (9.5 cm ± 0.3 cm) by 30" ± 1/4" (76 cm ± 0.6 cm). The splint shall be expanded shall be expanded from 0.03" (0.07 cm) thick 30003-H 14 aluminum or equivalent. Each splint shall be rolled and pressed. A strip of colored paper shall be placed under the outer edge of the splint so that the outer edge may be easily located.
Workmanship. The splint shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One splint, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business