A-A-51024
20 September 1985
COMMERCIAL ITEM DESCRIPTION
CATHETER, VETERINARY, HORSE, PLASTIC
The General Services Administration has authorized the use of this commercial item description.
Salient characteristics:
The catheter shall be radiopaque, and fabricated of a flexible transparent plastic, for use in veterinary urological procedures. The catheter shall be sterile when tested in accordance with the current United States Pharmacopoeia (USP).
The catheter shall have a length of 137 ± 10 cm and an outside diameter of 6.6 ± 0.3 mm. Two eyes shall be staggered axially near the closed end such that the eyes are separated by 2.2 ± 0.3 cm from a common point on each eye.
A plastic stylet shall be provided for rigidity during insertion.
Workmanship. The catheter shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One catheter, packaged sterile, in a sealed peel-open type container capable of maintaining sterility of contents constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business