A-A-0051877(DM)
Markings. Each blade shall be permanently and legibly marked with the commercial designation number. The blades shall bear the manufacturer’s name or registered trademark and the work “stainless”. Instructions of foreign manufacture shall bear the name of the country of manufacture.
Hardness test. Hardness test shall be determined by means of a Rockwell Hardness Tester having an N-Brale penetrator and a 30 kg. load. Impressions shall be taken as close to the cutting edge as possible, but not on beveled portions. The average of three readings shall be considered the hardness of the blade.
Workmanship. The blades shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Package (PG). One package containing three individually packaged sterile blades, as specified, constitutes one unit. The individual package shall be a sealed, peel-open type container capable of maintaining sterility of contents unless package is damaged or opened.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business