A-A-0051960(DM)
Certificate of freedom from pyrogens. A certificate of freedom from pyrogens, listing all lot or control numbers, shall state that samples from each lot or control have been tested for pyrogens and were found to comply with USP requirements. The certificate shall reference the method used in determining freedom from pyrogens.
Certificate of safety. A certificate of safety, listing all lot or control numbers, shall state that samples from each lot or control have been tested for safety as specified in the USP and are found to comply with such requirements. The certificate shall reference the method used in determining safety.
Compatibility. The materials of which the sets are manufactured shall not react with, or be acted upon by, the liquids with which they will be in contact during normal use and operation, nor shall there be any material incorporated in the set which will cause any deleterious effect when the set is used for the purpose intended.
Instruction. Detailed instructions for proper use of the sets shall be provided with each unit package.
Workmanship. Workmanship shall be first class throughout. The intravenous injection sets shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Package (PG). One package containing 20 individually packaged sterile intravenous injection sets, as specified, constitutes one unit (of issue). The individual package shall be a sealed, peel-open type container able to maintain sterility of contents unless package is damaged or opened. As an alternate, a sealed pouch of high density polyethylene (4 mil minimum) is also acceptable.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business