A-A-51509B
Radiopacity. The radiopaque line shall be permanently shown when tested in accordance with Method C of ASTM Designation F640.
Workmanship. The tracheal tubes shall be uniform in quality and free from any defects which affect the appearance or utility of the tube. Tracheal tubes shall be free from foreign matter, embedded particles, burrs, flashing, rough or sharp areas, cracks and other defects. Shall be free from large bubbles which affect the physical integrity of the device and free from areas of excessive bubbles which could affect the transparency of the device.
Unit. Package (PG). One package containing 10 tracheal tubes of one size only constitutes one unit. The tubes shall be individually packaged sterile in a peel-open type container capable of maintaining the sterility of the contents unless the package is damaged or opened. Package shall also be marked with tube I.D. and length.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business