A-A-51514B
PRODUCT QUALITY LEVEL
Visual and dimensional examination. Shall be examined to verify that the design, construction and workmanship are in accordance with applicable requirements. Needle keenness examination shall be at 10x magnification.
Materials. The supplier shall be responsible for performing tests to assure that materials are in accordance with requirements as specified.
Unit. Package (PG). One package containing one hundred (100) syringe and needle hypodermic of one size and type only packed in a readily opened container so constructed as to protect the needle cannula and maintain the sterility of the syringe and needle combination until manually opened.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Sampling for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105 and as specified herein. Unit of product for examination purposes shall be one syringe and needle. Sampling shall be inspection level II with an acceptable quality level (AQL) of 6.5 except the AQL for needle keenness. (See Note 3).
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business