A-A-53072A
Finish. All surfaces of the instrument and components shall have a uniform and smooth finish. Exterior surfaces shall be polished. The finish shall be free from burrs, pits, cracks, holes, rough areas, corrosion, or sharp edges. The edges of the side eyes shall be rounded or chamfered.
Passivation. Corrosion-resistant steel components shall be properly passsivated.
Identification marking and labeling. The bronchoscope shall be legibly and permanently marked with name of the manufacturer or registered trademark, size designation and date of manufacturing (year, month). The light carrier shall be permanently marked with the nominal length in centimeters.
Workmanship. The bronchoscope shall be free from defects which detract from its appearance or impair its serviceability.
Unit. EACH (EA). One bronchoscope of the size specified, constitutes one unit.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business