A-A-53101
Shall have a wooden applicator stick, if supplied, fabricated of tough, flexible, well seasoned, fungus-free wood that is smoothly finished, and has a moisture content of not less than 6% and not more than 12%.
Shall have a plastic applicator stick, if supplied, fabricated of a suitable plastic material which has sufficient flexibility to preclude breaking when bent to an angle of at least 80 degrees at its midpoint.
The method and efficacy of sterilization, for an applicator supplied in a sterile condition, shall be acceptable to the Food and Drug Administration (FDA).
The sterilizable (non-sterile) applicator, if supplied, shall be provided together with other applicators, consisting the same unit of issue quantity, in a suitable package that will permit and maintain sterilization of the applicator contents. This package shall contain a sterilization indicator for the required method of sterilization (gas or steam). This package shall also be supplied in a sealed condition that can withstand sterilization and maintain sterility of its applicator contents until the package is opened.
Workmanship. The applicator and its immediate package shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Package (PG). One package containing one hundred sterile or sterilizable applicators, as specified, constitutes one unit. The sterile applicators shall be packaged in a sealed container capable of maintaining sterility of contents unless the package is damaged or opened.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business