A-A-54209
Corrosion resistance. The forceps shall show no evidence of corrosion or plating of copper when tested in accordance with ASTM Designation F1089.
Performance. The forceps shall be in accordance with ASTM Designation F1089.
Identification marking and labeling. Forceps shall be legibly marked with the contractor’s name or trademark and the word “stainless”. Foreign manufactured forceps shall bear the name of the country of origin.
Workmanship. The forceps shall be free from cracks, pits, burs, sharp edges, scale, rough areas, corrosion and any defects which detract from its appearance or impair its serviceability.
Visual and dimensional examination. Forceps be examined to verify that the design, construction and workmanship are in accordance with applicable requirements.
Materials. The supplier shall be responsible for performing tests to assure that materials are in accordance with requirements specified.
Unit. Each (EA). One forceps of the type specified, constitutes one unit.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business