A-A-54283
Performance. The forceps shall open and close smoothly without binding. The cutter on the alligator jaw shall fit in the basket, and looseness or free play of either shank shall not permit any misalignment of the alligator jaw in closing.
Identification marking and labeling. The forceps shall bear the manufacturer’s name or registered trademark and the word “stainless”. Holders of foreign manufacture shall bear the name of the country of origin.
Workmanship. The forceps shall be free from cracks, pits, burrs, sharp edges, scale, rough areas, corrosion, grind or tool marks, and dirt or polishing materials.
Product Quality Level.
Visual and dimensional examination. Forceps shall be examined to verify that design, construction and workmanship are in accordance with applicable requirements.
Materials. The supplier shall be responsible for assuring that materials are in accordance with requirements specified.
Unit. Each (EA). One forceps, as specified, constitutes one unit.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business