A-A-54308
Style, design and dimensions. The bone plates shall be in accordance with Defense Personnel Support Center (DPSC) Drawing No. 1826 for style, design and dimensions.
Surface preparation. Description of surface characteristics and methods of surface preparation shall be in accordance with ASTM Designation F86.
Finish. The completed bone plate shall have a bright, smooth finish, properly passivated.
Corrosion properties. Bone plates shall show no evidence of corrosion when subjected to the following tests:
Intergranular corrosion. The intergranular corrosion susceptibility tested specified in ASTM Designation F138.
Saline. Bone plates shall be completely immersed into Normal Saline Solution (USP), and while immersed, placed into an oven at a temperature of 37° +/- 1°C for a period of seven days, removed from the oven and examined for corrosion while still immersed.
Boil. Bone plates shall be scrubbed with soap and water, rinsed thoroughly in distilled water, and dried. After cleaning, the instrument shall be boiled in distilled water in a beaker for 30 minutes, and allowed to remain submerged for an additional 24 hours.
Workmanship. The bone plate shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Each (EA). One bone plate of the size and millimeter specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business