A-A-54317
Performance.
Operation of ratchet mechanism. When tested as specified herein, the ratchet catch shall engage and disengage the ratchet teeth smoothly without binding or hesitation.
Engagement of ratchet teeth by ratchet catch mechanism. When tested as specified herein, the retractor shall open and not unlock at each place checked by closing. There shall be no binding or hesitation.
Operation of retractor without locking. When tested as specified herein, operation shall be smooth and easy, with no binding in any position.
Identification marking and labeling. The retractor shall be legibly marked with the contractor’s name or registered trademark and the word “stainless”. Foreign manufactured retractors shall bear the name of the country of origin.
Workmanship. The retractors shall be free from cracks, pits, burrs, sharp edges, scale, rough areas, corrosion or any defects which detract from their appearance or impair their serviceability.
Product Quality Level.
Visual and dimensional examination. Shall be examined to verify that design, construction and workmanship are in accordance with applicable requirements.
Materials. The supplier shall be responsible for assuring that materials are in accordance with requirements specified.
Unit. Each (EA). One retractor, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business