A-A-54368 Defibrillator And Cardioscope (Three Lead, Portable, With Charger)This commercial item description covers a cardiac care system suitable for use on patients experiencing cardiac crisis and for examining the electrical activity of the heart, with a means to produce a permanent record of the heart activity in the three standard ECG lead formats.

Pages 1 - 2 - 3 - 4 - 5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 - 18 - 19 - 20

A-A-54368

Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.

Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.

Sampling for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105 with an AQL of 1.0 (percent defective) and an inspection level of II. The unit of product for examination purposes shall be one defibrillator system.

Sampling for tests. Sampling for tests, including dimensional test, shall be conducted in accordance with MIL-STD-105 with an AQL of 1.5 (percent defective) and an inspection level of S-2. The unit of product for test purposes shall be one defibrillator system.

Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics. Tests shall include, but shall not be limited to, the following:

Strain Relief test (Battery Charger Line Cord).

Gradually apply a 35 lb. pull in a direction that would be the most likely to pull the cord from the enclosure and maintain for one minute. The strain relief is not acceptable if there is such movement of the cord as to indicate that stress is being transmitted to terminals, splices or interior wiring.

Air Clearance Spacing test.

Measurements shall be made, using an appropriate measuring instrument, to verify isolated patient connected circuitry is spaced at a minimum of 1/8 inch from non-isolated circuitry.