A-A-54474
Two (2) sets of any necessary cable clamps to keep motor control cables out of a sterile field.
One spare plug-in module with bulb for the illumination system.
Workmanship. The surgical shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One microscope system, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Inspections and tests. Inspections and tests shall be conducted on the surgical operation microscope in accordance with commercial practice to determine compliance with specification requirements. The sampling for inspections and tests shall be conducted in accordance with commercial practice.
Performance testing. Each surgical operating microscope shall be completely assembled in its operational configuration and tested to demonstrate its capability for proper operation. The testing shall include checking for proper operation of the following:
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business