A-A-54541
Corrosion resistance. Parts fabricated from Class 4 steel shall show no signs of corrosion or plating of copper when tested in accordance with ASTM Designation F899, and Class 3 and AISI carbon steel 6150H or 8650H parts shall show no signs of corrosion when boil tested in accordance with ASTM Designation F1089.
Performance. The jaws shall align as shown on the drawing in the closed position. Jaw separation shall be uniform in depth and spacing. Following the boil test, the spreader shall be opened and closed 5 times using one hand. Action shall be without binding and the spring shall not slip out of its cavity.
Identification marking and labeling. Spreaders shall be legibly marked with the contractor’s name or registered trademark and the word “stainless” (if it is fabricated from stainless steel). Foreign manufactured spreaders shall bear the name of the country of origin.
Workmanship. The spreader shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One spreader, as specified, constitutes one unit.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business