A-A-54544
Performance. Under no circumstances shall looseness or free play permit misalignment of the jaws upon closing.
Finish. The forceps shall have a mirror, satin or matte finish. The finish shall be uniform and free from cracks, pits, crevices, burrs, grind or tool marks and dirt or polishing materials.
Passivation. The forceps shall be properly passivated.
Identification marking and labeling. The forceps shall be legibly marked with the contractor’s name or registered trademark and the word “stainless”. Foreign manufactured forceps shall bear the name of the country of origin.
Workmanship. The forceps shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One forceps, as specified, constitutes one unit
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business