A-A-30189
Aluminum nose-piece 3-1/2 inches (9 cm) long by 3/16 inch (0.476 cm) wide.
The respirator shall meet the requirements of Class 1 Code of Federal Regulation CFR Part 16. The mask shall not cause irritation to the skin and eyes when tested using human panel and rabbit subjects in compliance with Federal Regulation CFR Part 16, Section 1500.41 and 1500.42.
Workmanship. The respirator shall be free from defects which detract from its appearance or impair its serviceability.
Unit. The unit of issue shall appear in the VA solicitation.
Quality Assurance Provisions
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contract or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government's request, at any time, or from time-to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and Chemical properties) of the item.
Tests. Tests shall be conducted to determine compliance with this commercial item description requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business