COMMERCIAL ITEM DESCRIPTION A-A-51708
Passivation. Materials used in the fabrication of the mallet shall be passivated, if required.
Finish. The mallet shall be satin or mirror in accordance with Federal Specification GG-I-526.
Boil test. The mallet shall be tested in accordance with Federal Specification GG-I-526.
Copper sulfate test. Should be the mallet be fabricated from class 6 ferritic stainless steel, the mallet shall be tested in accordance with Federal Specification GG-I-526.
Marking. Mallets shall bear the name or registered trademark of the manufacturer and the work “stainless”. In addition, instruments of foreign manufacture shall bear the name of the country of manufacture.
Workmanship. The mallet shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One mallet of the same size, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business