A-A-51712A
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics.
Sampling. Sampling for examination shall be conducted in accordance with MIL-STD-105 and Table I. The unit of product for sampling purposes shall be one tong assembly.
TABLE I.
|
Type of defects |
Inspection Level |
AQL (percent defective) |
|
Major |
II |
1.0 |
|
Minor |
II |
4.0 |
CLASSIFICATION OF DEFECTS
|
Categories |
Defects |
|
Critical |
None defined. |
|
101 |
Tong assembly not free from cracks, pits, burrs, sharp edges, scale, rough areas or corrosion. |
|
102 |
Finish of the tong assembly not as specified. |
|
103 |
Screws and locking device do not turn with a smooth and equal resistance. |
|
104 |
Style and design not as specified. |
|
Minor |
|
|
201 |
Identification marking not present, not complete, not correct, or not legible. |
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business