COMMERCIAL ITEM DESCRIPTION A-A-53010
Unit of issue. Package (PG). One package, containing 50 individually packaged catheter and needle units, as specified, constitutes one unit of issue. The contractor’s for the individual catheter and needle unit shall be a clear plastic tube with a removable cap. The cap shall contain a bacterial filter to permit gas sterilization. The cap shall be sealed to the tube with pressure-sensitive tape. Also acceptable shall be a pouch of clear plastic sheet with a film of unwoven polyolefin heat-sealed around the edges. A pouch of 4 mil high density polyethylene with heat sealed cut edges is also acceptable.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Tests. Test shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics.
Sampling for tests. Sampling for tests shall be conducted in accordance with MIL-STD-105 and as specified herein. The unit of product for test purposes shall be one catheter and needle unit.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business