A-A-53383
Defects.
Clip not plated as specified.
Plating not uniform and not free from flaking.
Clip not free from cracks, burrs, pits, scale and corrosion.
Sampling for tests. Sampling for tests shall be conducted in accordance with MIL-STD-105 and as specified herein. The unit of product for test purposes shall be one instrument. AQL shall be 1.0 (percent defective) with an inspection level of S-2.
Tests.
Sterilization. The clips shall be placed into a suitable sterilizer at a temperature of 250° Fahrenheit for a period of at least 10 minutes. The clips shall then be one instrument. AQL shall be 1.0 (percent defective) with an inspection level of S-2.
Permanent set. Measure the existing opening of the sample clip. The clip shall then be held in the hand and with a suitable instrument placed at the center of the clip, spread open to a distance of 3/8 ± 1/32 inch and then released. The clip shall return to within 5/32 inch maximum of the starting dimension. The test shall be repeated 3 times.
Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers’ own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Regulatory requirements.
Federal Food, Drug and Cosmetic Act. If the product covered by this document has been determined by the U.S. Food and Drug Administration to be under its jurisdiction, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of Federal Food, Drug and Cosmetic Act, as amended, and regulations promulgated thereunder. In addition, the offeror/contractor shall comply, and be responsible for compliance by its subcontractors/suppliers, with the requirements of all other applicable Federal, State, and local statutes, ordinances, and regulations.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business