A-A-53466
Finish. The finish of the elevator shall be satin or matte. The finish shall be uniform and free from burrs, pits, scale, cracks, and grind or tool marks.
Markings. The elevator shall bear the manufacturer’s name or registered trademark and the word “stainless”. Instruments of foreign manufacture shall bear the name of the country of manufacture.
Workmanship. The elevators shall be processed in such a manner as to be uniform and free from defects which affect life, utility, or appearance.
Product Quality Level.
Visual and dimensional examination. Shall be examined to verify that design, construction and workmanship are in accordance with applicable requirements.
Materials. The supplier shall be responsible for assuring that materials are in accordance with requirements specified.
Unit. Each (EA). One elevator, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business