A-A-53466
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Examination. Elevators shall be examined to determine compliance with specification requirements.
Tests. Tests shall be conducted to determine compliance with specification requirements. Where feasible, the same sample shall be used for the determination of two or more test characteristics.
Sampling for tests. Sampling for tests shall be conducted in accordance with MIL-STD-105 and as specified herein. The unit of product for test purposes shall be one elevator. Sampling shall be as specified in the individual tests below.
Tests.
Rockwell hardness. Elevators shall be tests for Rockwell hardness in accordance with ASTM Standard E18, or ASTM Standards E92 and E140. Sampling shall be level S-1 with an AQL of 1.0.
Corrosion resistance. Elevators shall be tested for resistance to corrosion in accordance with the Resistance to Boil and Resistance to Copper Sulfate tests of ASTM Standard 1089. Sampling shall be S-2 with an AQL of 1.0.
Contractor certification. The contractor shall certify that the product offered meets the salient characteristics of this description and conforms to the producers’ own drawings, specifications, standards, and quality assurance practices. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business