A-A-54141
Dimensions. The unit shall have overall dimensions which do not exceed 500 cubic inches and shall weigh no more than seven (7) pounds.
Electrical. The unit shall operate on a nominal 115/230 volt single phase 50/60 Hz power source. The unit shall comply with applicable requirements of UL 1244, measuring and test equipment.
Maintenance. The unit shall be designed for a service life of at least seven (7) years. The unit shall be supplied with organizational maintenance devices (fuses, batteries, etc.) which are replaceable without disassembly of the basic unit.
Workmanship. The analyzer shall be free from defects which detract from its appearance ox impair its serviceability.
Unit. Each (EA). One analyzer, as specified, constitutes one unit.
Quality Assurance Provisions.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business