A-A-54296
Adjustable Single Pin-To-Rod Clamp. The adjustable clamp shall be fabricated of a lightweight composite material or anodized aluminum. The clamp shall be capable of securely locking onto the rod at all points along the length of the rod and at any angle. The clamp shall consist of two nuts, one rod-clamp body, and one pin-clamp body. One nut shall secure the rod-clamp to the rod. The other nut shall secure the pin-clamp body to the pin. The pin-clamp body shall rotate 360° on the rod-clamp body, independent of the rod-clamp position. The clamp components shall be compatible with the rod and the other instruments.
The clamps shall be numbered and the nuts color coded to denote proper sequence of application as stated in the instructions. The two nuts on each clamp shall be a different color, one from the other. The threaded portion of the clamp shall be notched to prevent complete disengagement of the nuts from the clamp body.
Adjustable Double Pin-To-Rod Clamp. The adjustable clamp shall be fabricated of a lightweight composite material or anodized aluminum. The clamp shall be capable of securely locking onto the rod at all points along the length of the rod and at any angle. The clamp shall consist of two bolts, one rod-clamp body, and one pin-clamp body shall have a pivoting feature which shall allow independent rotation of each pin through an angle of +/- 19 as a minimum. The clamp components shall be compatible with the rod and the other instruments.
The threaded portion of the clamp shall be notched to prevent complete disengagement of the bolts from the clamp body.
Self-drilling, Self-tapping Pin. Pin shall be fabricated of stainless steel conforming to the composition specified in the latest revision of ASTM Designation F138, Grade 2. Pin shall have a 5.0mm diameter, 165 (+/- 17) mm length, with a maximum thread length of 50mm. Shall be self-tapping and have a drilling point. The flute shall be specifically designed to pull back bone debris, thereby decreasing heat production during insertion. Pin shall not require a predrilled hole for insertion.
Combination wrench. Wrench shall be fabricated of a suitable corrosion resistant metal or metal alloy. The wrench shall be suitable for loosening and tightening the clamp bolts and clamp nuts. Wrench shall also accommodate the 5.0 mm pins, without slipping.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business