A-A-54303 Forceps, Bronchoscopic, Biopsy, Cannulated

Pages 1 - 2 - 3 - 4 - 5

A-A-54303

Corrosion resistance. The forceps shall show no evidence of corrosion or plating of copper when tested in accordance with ASTM Designation F1089.

Performance. The forceps shall open and close smoothly without binding. Looseness or free play at the distal end shall not permit misalignment of the jaws.

Workmanship. The forceps shall be processed in such a manner as to be uniform and free from cracks, pits, burrs, sharp edges, rough areas, corrosion, grind or tool marks, and dirt or polishing materials.

PRODUCT QUALITY LEVEL.

Visual and dimensional examination. The forceps shall be examined to verify that the design, construction and workmanship are in accordance with applicable requirements.

Materials. The supplier shall be responsible for performing tests to assure that materials are in accordance with requirements specified.

Unit. Each (EA). One forceps, as specified, constitutes one unit.

QUALITY ASSURANCE PROVISIONS.

Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.

Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.