A-A-54408
Instructions. Each kit shall be furnished with a list of the kit contents and procedural instructions for use.
Pressure tests. The kit shall not leak nor shall any damage occur when subjected to an internal hydrostatic pressure of 8 psig for 30 seconds.
Workmanship. The kit shall be free from defects which detract from its appearance or impair its serviceability. Components and tray shall be free from burrs, flash, cracks, corrosion or foreign material.
Unit. Kit (KT). One blood exchange-transfusion kit, as specified, constitutes one unit.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Sampling for examination. Sampling for examination shall be conducted in accordance with MIL-STD-105, and as specified herein. Unit of product for examination purposes shall be one blood exchange-transfusion kit. Sampling shall be inspection level II with an acceptable quality level (AQL) of 1.0.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business