A-A-54522
Corrosion resistance. The screwdriver shall show no evidence of corrosion when boil tested in accordance with ASTM F1089. The shaft and operative end shall show no evidence of corrosion or plating of copper when tested in accordance with ASTM F1089.
Sterilization. The screwdriver shall be capable of withstanding repeated sterilization when autoclaved of 270 +/-5 degrees F and 27 +/- 1 psi for a minimum of 20 minutes. Screwdriver shall show no evidence of corrosion, peeling or delamation when sterilized as specified herein.
Identification marking and labeling. The shaft shall be marked “stainless”. Manufacturer’s name or trademark and manufacturer’s catalog number shall be permanently and legibly marked on the instrument. Marking shall be done in a manner that will not impair the mechanical properties or the corrosion resistance of the instrument.
Workmanship. The screwdriver shall be free from defects which detract from its appearance or impair its serviceability.
Unit. Each (EA). One screwdriver, as specified, constitutes one unit.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business