A-A-54579
The block and bracket shall have aligned slots or cutouts that provide specific positions for holding and separating six (6) surgical instruments. The block shall support the notched sectors of surgical instrument handles (see figure 1). The bracket shall support the surgical instruments at their shafts which are located above the knurled handles (see figure 1). The closure cover and drain holes shall permit the tips of the surgical instruments to receive proper steam flow during autoclaving.
Workmanship. The instrument set, shall be free from defects which detract from their appearance or impair their serviceability.
Unit. Each (EA). One instrument set, as specified, constitutes one unit.
QUALITY ASSURANCE PROVISIONS.
Responsibility for inspection. Unless otherwise specified in the contract or purchase order, the contractor is responsible for the performance of all inspection requirements as specified herein. Except as otherwise specified in the contact or purchase order, the contractor may use his own or any facilities suitable for the performance of the inspection requirements specified herein, unless disapproved by the Government. The Government reserves the right to perform any of the inspections set forth in the specification where such inspections are deemed necessary to assure supplies and services conform to prescribed requirements.
Records. Records of examinations and tests performed by or for the contractor shall be maintained by the contractor and made available to the Government upon the Government’s request, at any time, or from time to time, during the performance of the contract and for a period of three years after delivery of the supplies to which such records relate.
Inspection. Inspection, as used herein, is defined as both examination (such as visual or auditory investigation without the use of special laboratory appliances or procedures) and testing (determination by technical means of physical and chemical properties) of the item.
Examination and testing. Examination and testing shall be conducted on the surgical instruments and sterilization case in accordance with commercial practice. The sampling for examination shall be in accordance with commercial practice.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business